Whew, what should have been super easy to assemble turned out wrong. First, parts were labeled incorrectly, but luckily with only 5 parts they could be matched to the drawings. But the really bad error was two holes were mis-drilled, off by half a hole. Again, luckily I have mechanical abilities and was able to ream the whole. CAUTION! If you must, drill only the outside edge. There is a nutplate inside, and if you drill too deep you will destroy the nutplate. I dont know if the average consumer could have done the job. Otherwise it would have been a great, simple bed.
Good, but With Mistakes
Whew, what should have been super easy to assemble turned out wrong. First, parts were labeled incorrectly, but luckily with only 5 parts they could be matched to the drawings. But the really bad error was two holes were mis-drilled, off by half a hole. Again, luckily I have mechanical abilities and was able to ream the whole. CAUTION! If you must, drill only the outside edge. There is a nutplate inside, and if you drill too deep you will destroy the nutplate. I dont know if the average consumer could have done the job. Otherwise it would have been a great, simple bed.