If a 78 year old single woman can do it, so can you!
Lottsa pieces but stay strong! Lay them out. I needed to hammer in most of the dowels, and there was not enough glue. I thought it a very ineffective way to provide glue. Probably would have been better served with a small tube of Elmers. Be careful installing the runners, and observe the holes because as you can see from the two pictures, I put some in upside down the first time. When screwing in the legs, I found it much easier to hold the screw tight while turning the leg. When it was time to do the drawers I again put a piece upside down (I think it was 14; see the picture where the drawer doesnt align). Everything aligned perfect once I turned the piece over.
If a 78 year old single woman can do it, so can you!
Lottsa pieces but stay strong! Lay them out. I needed to hammer in most of the dowels, and there was not enough glue. I thought it a very ineffective way to provide glue. Probably would have been better served with a small tube of Elmers. Be careful installing the runners, and observe the holes because as you can see from the two pictures, I put some in upside down the first time. When screwing in the legs, I found it much easier to hold the screw tight while turning the leg. When it was time to do the drawers I again put a piece upside down (I think it was 14; see the picture where the drawer doesnt align). Everything aligned perfect once I turned the piece over.