Assembly instructions are barely above trial and error
The table it self is quite nice. The overall look is pleasant and practical. I like the small size and shopped for several days before finding just what I wanted in this table. I dont agree with any who says the assembly is easy. There are only two numbered steps but many things that have to be just so. The legs had at least 3 little stickers with a letter and a number but they are not mentioned anywhere in the two steps. The two shelves are the same shape but not the same size and again this difference is not mentioned in the instructions. The smaller one fits closer to the top. Two of the four legs have a small bracket near the top of the leg that can be used to fasten the table to the wall as a safety measure. One of these two legs must go on the right and the other on the left but there are no markings to indicate which goes where. Pay close attention to the little drawings. It is much easier to attach 3 of the four legs with the table placed on its top and the drawer pulled most of the way out. When you have 3 legs attached, turn the table up on its legs and attach the two shelves. Along the way I found several pieces that fit in the wrong place, hence trail and error was used. Dont give up and youll end up with a really nice table.
Assembly instructions are barely above trial and error
The table it self is quite nice. The overall look is pleasant and practical. I like the small size and shopped for several days before finding just what I wanted in this table. I dont agree with any who says the assembly is easy. There are only two numbered steps but many things that have to be just so. The legs had at least 3 little stickers with a letter and a number but they are not mentioned anywhere in the two steps. The two shelves are the same shape but not the same size and again this difference is not mentioned in the instructions. The smaller one fits closer to the top. Two of the four legs have a small bracket near the top of the leg that can be used to fasten the table to the wall as a safety measure. One of these two legs must go on the right and the other on the left but there are no markings to indicate which goes where. Pay close attention to the little drawings. It is much easier to attach 3 of the four legs with the table placed on its top and the drawer pulled most of the way out. When you have 3 legs attached, turn the table up on its legs and attach the two shelves. Along the way I found several pieces that fit in the wrong place, hence trail and error was used. Dont give up and youll end up with a really nice table.