Sturdy in the end, but was missing hardware and had splintering joints
It will be OK, but several of the pre/drilled holes split when you screw into the rails. Either the holes are too small or off/center. I would hear wood crack, stop, back the screw out, drill the hole slightly wider, and then re/screw. Had to do it about 5 times so the joints could be pulled tight without it breaking. The splintering at those joints is visible. That, plus 6 missing screws, made assembly obnoxious.
Sturdy in the end, but was missing hardware and had splintering joints
It will be OK, but several of the pre/drilled holes split when you screw into the rails. Either the holes are too small or off/center. I would hear wood crack, stop, back the screw out, drill the hole slightly wider, and then re/screw. Had to do it about 5 times so the joints could be pulled tight without it breaking. The splintering at those joints is visible. That, plus 6 missing screws, made assembly obnoxious.