The screws supplied for the two little vertical bars that tie together the middle of the safety rails on the top bunk are too short. I had to buy 8 x 1/1/2 inch screws to properly fasten those two parts. See picture.
The /hex key that comes with the kit is rubbish and started to strip out some of the screw heads. Fortunately I had a proper 3mm one that saved the day.
The wood had one saw mark and some other dings and scratches. I was mostly able to hide these imperfections by making those pieces face the wall. I recommend the plain unstained/natural look because these imperfections are less noticeable.
In my opinion, the beds need more cross slats to support the mattress. They didnt break, but the mattress did sag between slats. So I bought more for about 50 from store on , They look identical and came with screws. I probably could have used shorter than 39 inch slats, but I got them a little long and cut them myself. Ok.
Great with some tweaks: Needs more slats
The screws supplied for the two little vertical bars that tie together the middle of the safety rails on the top bunk are too short. I had to buy 8 x 1/1/2 inch screws to properly fasten those two parts. See picture. The /hex key that comes with the kit is rubbish and started to strip out some of the screw heads. Fortunately I had a proper 3mm one that saved the day. The wood had one saw mark and some other dings and scratches. I was mostly able to hide these imperfections by making those pieces face the wall. I recommend the plain unstained/natural look because these imperfections are less noticeable. In my opinion, the beds need more cross slats to support the mattress. They didnt break, but the mattress did sag between slats. So I bought more for about 50 from store on , They look identical and came with screws. I probably could have used shorter than 39 inch slats, but I got them a little long and cut them myself. Ok.