The product seems sturdy. It was easy to put together but it is a two person job. I put it together by myself but I wish i had another person to help. It took me less than two hours to put together. The daybed is very pretty to look at. I'm satisfied with the product, especially for the price.
Great look, fairly simple to put together. You will need 2 people to help keep the rods in place so you don't get too frustrated!
Sturdy and comfy! Perfect in my office to use as a couch and doubles as an extra bed for guests!
Very attractive looking and nice finish on the wooden frame. All hardware parts are shrink packed and labeled with the piece counts (which saves time and shows attention to detail). I am used to assembling toys for my grand-kids and especially pre-fabed furniture for my personal use, however the upper side and back frame decor slats take more time and attention than normal in assembly as you have to position them firmly and keeping them firmly positioned while bolting the frame. The instruction sheets should be better and clearer in explaining which parts could be be pre-assembled first. In order to complete the final assembly stage you should assemble sections prior to bolting. Much easier to ignore instructions and analyze which is which after sorting ALL parts.. It pays to have someone offer some minor assistance holding a few parts during the assembly. The instructions did warn of the weight limit being 225 lbs. max. so I ordered 3 Bear Claw brand mattress supports (increases weight limits greatly)which have really improved the ability of Santa Claus sleeping over without possibly breaking his neck and falling thru the mattress slats (ho,ho,ho!). NOW that I have seemed to air out my installation concerns I must say that this daybed is BEAUTIFUL, STURDY, and FUNCTIONAL making a nice furniture addition to our den. The installation results is definitely worth the effort.
Don't hesitate to purchase this daybed as you will not be sorry if you do!
Was fairly easy to assemble, and works well. Nice piece of furniture. My only difficulty was the spindles in the back. But I would recommend it to friends.
nice bed! they're not kidding though, you really need two people to put it together. I screwed a 1/4 piece of plywood down to the slats and it seemed to make a big difference on the stiffness of the entire bed.
Put bed together and it really wasn't hard at all. All you need to do is read and follow instructions. Now the bed isn't an expensive bed so don't expect a $1,000 quality bed for this price. It is very sturdy I will say that but there were some minor chips in paint but nothing the average person looking at the bed will see. The only reason I saw them is because I put the bed together otherwise I wouldn't have a clue. The bed is for my two year old daughter and works great. It is a little higher than expected. She can climb out of bed on her own but harder for her to climb in alone but we put her to bed most of the time anyways. We also have her crib mattress on the floor at night in case she rolls out but for a week that we have had it she hasn't rolled out we put a pillow on that side and she seems to be doing fine with that.
Didn't take me long at all to put together. This bed is very good quality, very sturdy. The paint finish is very good and even, the holes all match up. Do yourself a favor though, get yourself a decent hex wrench with a handle on it - it will make all the difference in the world. As I am putting a foam mattress on it I will be making a bed board of 1/4plywood to go over the slats.
For those new to assembling things like this: Don't try to assemble it while it is standing up. Get yourself a little wood glue and put a dab in each hole where the slats go on the side panel (don't use the foam stoppers), assemble it while it is lying on the floor. Do the same for the backboard. With the backboard lying on the floor fit one side panel on and screw the screws in. Then put the other side panel into place. Very carefully put the front bed rail in then fasten the screws on the side panel. Again, very carefully turn the bed where the backboard is on the floor and finish installing the front rail screws.
Beautiful bed. Trim and sleek, love the color. Now I need a trundle and the old one I had ( 74pop up) will not fit.
Not to difficult to put together. One thing my husband pointed out, is make sure all the white stickers are facing the inside...which I didn't do an he had to take one side apart. LOOK at the picture.. The curve goes up on the side rails to match the back.If you follow the directions and have a little patience you'll be fine. There was a small defect in mine, but I chose not to return as the pillows cover it. All in all it's a really nice piece for the money. I hope this was helpful! I would recommend this!
Reviews
Sturdy and perdy
The product seems sturdy. It was easy to put together but it is a two person job. I put it together by myself but I wish i had another person to help. It took me less than two hours to put together. The daybed is very pretty to look at. I'm satisfied with the product, especially for the price.
Great look, fairly simple to put together
Great look, fairly simple to put together. You will need 2 people to help keep the rods in place so you don't get too frustrated! Sturdy and comfy! Perfect in my office to use as a couch and doubles as an extra bed for guests!
Definitely 5 STARS cosmetically !
Very attractive looking and nice finish on the wooden frame. All hardware parts are shrink packed and labeled with the piece counts (which saves time and shows attention to detail). I am used to assembling toys for my grand-kids and especially pre-fabed furniture for my personal use, however the upper side and back frame decor slats take more time and attention than normal in assembly as you have to position them firmly and keeping them firmly positioned while bolting the frame. The instruction sheets should be better and clearer in explaining which parts could be be pre-assembled first. In order to complete the final assembly stage you should assemble sections prior to bolting. Much easier to ignore instructions and analyze which is which after sorting ALL parts.. It pays to have someone offer some minor assistance holding a few parts during the assembly. The instructions did warn of the weight limit being 225 lbs. max. so I ordered 3 Bear Claw brand mattress supports (increases weight limits greatly)which have really improved the ability of Santa Claus sleeping over without possibly breaking his neck and falling thru the mattress slats (ho,ho,ho!). NOW that I have seemed to air out my installation concerns I must say that this daybed is BEAUTIFUL, STURDY, and FUNCTIONAL making a nice furniture addition to our den. The installation results is definitely worth the effort. Don't hesitate to purchase this daybed as you will not be sorry if you do!
works well.
Was fairly easy to assemble, and works well. Nice piece of furniture. My only difficulty was the spindles in the back. But I would recommend it to friends.
nice bed! they're not kidding though
nice bed! they're not kidding though, you really need two people to put it together. I screwed a 1/4 piece of plywood down to the slats and it seemed to make a big difference on the stiffness of the entire bed.
fine bed for price
Put bed together and it really wasn't hard at all. All you need to do is read and follow instructions. Now the bed isn't an expensive bed so don't expect a $1,000 quality bed for this price. It is very sturdy I will say that but there were some minor chips in paint but nothing the average person looking at the bed will see. The only reason I saw them is because I put the bed together otherwise I wouldn't have a clue. The bed is for my two year old daughter and works great. It is a little higher than expected. She can climb out of bed on her own but harder for her to climb in alone but we put her to bed most of the time anyways. We also have her crib mattress on the floor at night in case she rolls out but for a week that we have had it she hasn't rolled out we put a pillow on that side and she seems to be doing fine with that.
Fantastic Quality and easy to put together also tips for putting it together
Didn't take me long at all to put together. This bed is very good quality, very sturdy. The paint finish is very good and even, the holes all match up. Do yourself a favor though, get yourself a decent hex wrench with a handle on it - it will make all the difference in the world. As I am putting a foam mattress on it I will be making a bed board of 1/4plywood to go over the slats. For those new to assembling things like this: Don't try to assemble it while it is standing up. Get yourself a little wood glue and put a dab in each hole where the slats go on the side panel (don't use the foam stoppers), assemble it while it is lying on the floor. Do the same for the backboard. With the backboard lying on the floor fit one side panel on and screw the screws in. Then put the other side panel into place. Very carefully put the front bed rail in then fasten the screws on the side panel. Again, very carefully turn the bed where the backboard is on the floor and finish installing the front rail screws.
We love the bed, very nice look, really solid.
Adult Daughter loves the bed. It's very very very solid. No issues assembling other than clean out the predrilled holes first.
Easy to assemble in 10 minutes. Looks great.
A as described and shown in photo.
BEAUTIFUL Day Bed!
Beautiful bed. Trim and sleek, love the color. Now I need a trundle and the old one I had ( 74pop up) will not fit. Not to difficult to put together. One thing my husband pointed out, is make sure all the white stickers are facing the inside...which I didn't do an he had to take one side apart. LOOK at the picture.. The curve goes up on the side rails to match the back.If you follow the directions and have a little patience you'll be fine. There was a small defect in mine, but I chose not to return as the pillows cover it. All in all it's a really nice piece for the money. I hope this was helpful! I would recommend this!
Add a review