Not gonna lie it was quite time consuming but the instructions and assembly is very straightforward. It took me about an hour and a half to put it all together. Very sturdy and I like the height that the tv mount gives off. Great purchase.
Nice enough! Has a nice look. Sturdy enough for any tv, not meant for a lot of weight. Protect from water or liquid, to eliminate any damage potential. Fits lots of decorating motifs.
Overall, I like this cabinet, but I have a few minor quibbles about the cable cutouts on the rear panel.
The holes are more or less centered to each cubby (the middle shelf height is adjustable), but at least for my uses, could be lower, larger, and perhaps the holes could be customizable in size, with options for a rectangular cutout(s).
For users with soundbars, the depth of the cabinet is likely fine, as thats going to be on top anyhow. However, it is not quite deep enough for an AV receiver inside of the cubbies, as the cable and speaker connections stick out.
As such, my receiver sits on top.
The TV stand looks great w/ the modifications I made. The instructions were easy to follow. Heres where I ran into a few issues:
1. There were some holes that were missing. When I was aligning the top shelf, there were two screws that didnt have holes drilled into the wood. I ended up removing these screws, and that allowed me to secure the shelf into the other holes.
2. A few holes did not line up with the wood pegs. There werent any other options on the side to place the wood pegs, and I double checked the instructions to ensure the pegs had been properly placed. I ended up removing the wood pegs that didnt have a hole that aligns, and that worked out. My only concern is the overall sturdiness of the connection the side panel has to the rest of the TV stand.
3. I ran into an issue where the provided screws for one step were too long for the holes that were drilled. I took a trip to Home Depot and purchased shorter screws. They went into the wood perfectly.
Overall, the couple of screws + wooden pegs I had to remove dont seem to compromise the overall structure of the TV stand. I will need to be mindful of what is placed on top of the stand since the stand isnt as secure as it should be.
This unit is so beautiful. I have the black one. However, the inside shelves were too wide and I could only use one. I tried but it snapped the front part out of place and almost broke it. I had to take the right shelf back out which was fine. I just put a tall vase with flowers there. The fireplace works perfectly though.
Reviews
Works great
My only complaint was it took me and my husband hours to assemble. It works great and looks aming
I LUV the Fireplace
My 55inch TV. And, they also assemble it on the spot! Awesome job!
Pleasantly surprised
Not gonna lie it was quite time consuming but the instructions and assembly is very straightforward. It took me about an hour and a half to put it all together. Very sturdy and I like the height that the tv mount gives off. Great purchase.
Nice for what you pay for
Nice enough! Has a nice look. Sturdy enough for any tv, not meant for a lot of weight. Protect from water or liquid, to eliminate any damage potential. Fits lots of decorating motifs.
Quality TV stand for the price
Overall, I like this cabinet, but I have a few minor quibbles about the cable cutouts on the rear panel. The holes are more or less centered to each cubby (the middle shelf height is adjustable), but at least for my uses, could be lower, larger, and perhaps the holes could be customizable in size, with options for a rectangular cutout(s). For users with soundbars, the depth of the cabinet is likely fine, as thats going to be on top anyhow. However, it is not quite deep enough for an AV receiver inside of the cubbies, as the cable and speaker connections stick out. As such, my receiver sits on top.
Product was easy to assemble and looked good
Tv stand that was easy to assemble and holds a 65 tv perfectly. Looks more expensive then it is.
Nice look
Looks great and fits in the space perfect with a 65 inch tv
Nice product
You wont be disappointed with the product.
Missing a Couple of Holes Some Holes Too Small for Provided Screws
The TV stand looks great w/ the modifications I made. The instructions were easy to follow. Heres where I ran into a few issues: 1. There were some holes that were missing. When I was aligning the top shelf, there were two screws that didnt have holes drilled into the wood. I ended up removing these screws, and that allowed me to secure the shelf into the other holes. 2. A few holes did not line up with the wood pegs. There werent any other options on the side to place the wood pegs, and I double checked the instructions to ensure the pegs had been properly placed. I ended up removing the wood pegs that didnt have a hole that aligns, and that worked out. My only concern is the overall sturdiness of the connection the side panel has to the rest of the TV stand. 3. I ran into an issue where the provided screws for one step were too long for the holes that were drilled. I took a trip to Home Depot and purchased shorter screws. They went into the wood perfectly. Overall, the couple of screws + wooden pegs I had to remove dont seem to compromise the overall structure of the TV stand. I will need to be mindful of what is placed on top of the stand since the stand isnt as secure as it should be.
Beautiful piece of furniture.
This unit is so beautiful. I have the black one. However, the inside shelves were too wide and I could only use one. I tried but it snapped the front part out of place and almost broke it. I had to take the right shelf back out which was fine. I just put a tall vase with flowers there. The fireplace works perfectly though.
Add a review